DIY Simple Dyed Rope Bowl

DIY Tie Dye Rope Bowl | Revamperate DIY Tie Dye Rope Bowl | RevamperateSo there’s a story here. First of all, my cats are spoiled rotten and have tons of toys that they don’t even play with because Penny would rather play with a pipe cleaner and Oliver is afraid of almost everything. This leaves me with a ton of toys that need a place to hang out, so I’ve been keeping them in a tiny bucket for a while now, which was overflowing. 

That brings me to today’s DIY, which I’m super excited about, to be honest! This simple dyed rope bowl uses regular ‘ol acrylic paint, but waters it down to give it a watercolor-looking effect. It was a really fun project and left me wanting to try this technique for other DIYs. You can do this with as many colors as you want, but you should be careful about overlapping them so that you don’t turn the paint brown. I used three similar shades of blue/teal, so when they overlapped it didn’t effect the paint. 

Now, let’s have some fun with paint!

DIY Tie Dye Rope Bowl | RevamperateDIY Tie Dye Rope Bowl | RevamperateTime: 20 minutes + dry time

Supplies:

  • Clothesline rope (or similar)
  • 2-3 colors of standard acrylic paint
  • Water
  • Paintbrushes
  • Cups
  • Scissors
  • Glue gun

First, cut the rope to be about 20 feet (the more the merrier). This is an estimate for making a bowl approximately 5 inches wide. I recommend laying out a large plastic bag on your work surface to lay the wet rope on to dry. 

Fill each cup with about 2 inches of water, pour several drops of paint in each one and stir well with a paintbrush until you reach your desired coloring. Watering down the paint makes it stick easily to the rope and give it a watercolor or tie dye look. 

Begin dipping several inches of rope at a time in your desired colors (I used three similar ones). I did not follow a specific pattern and allowed the colors to overlap slightly for a tie dyed appearance. I don’t recommend overlapping colors if you’re using very different colors because it could taint the paint in each cup and turn your colors brown. Some paint will settle on the bottom of the cup, so I also recommend avoiding touching the bottom with the rope. Continue until the entire rope is colored and allow to dry on the plastic bag overnight.

DIY Tie Dye Rope Bowl | Revamperate DIY Tie Dye Rope Bowl | RevamperateOnce completely dry, use your glue gun to create the bowl. At one end, bend the rope and glue into a spiral. Continue the pattern until it is about 4-5 inches wide. Then, instead of going outward, start gluing at an angle so that the rope begins to form upward in a bowl shape. You can either go straight up into a cylinder shape or continue outward in a standard bowl shape, but this is a little more difficult. Continue gluing until you reach your desired size and shape, and glue the very end of the rope securely to the bowl (and cut carefully since it may be frayed). 

The hot glue should dry quickly, leaving the bowl fairly stable. Fill it with whatever you’d like and enjoy!

Leave a Reply

Your email address will not be published. Required fields are marked *